i-Pan4 Eval-Kit

Evaluation Kit with 4.3" LCD Display for NXP i.MX 28 CPU

i-PAN4_Eval-Kit_500x550Px.png

Processor

Low Power NXP i.MX 287 CPU, 454MHz (before Freescale)

RAM Memory

128 MB DDR2-RAM

Flash Storage

Onboard 4 Bit wide μSD Socket for Cards up to 32 GB

Onboard

Display Interfaces: 4.3" cap. touch TFT-display (480 x 272 pixel)

Features: μUSB2.0-OTG connector, 2x non-isolated FlexCAN Transceivers, 10/100 Ethernet PHY, i2S Audio Codec, Realtime Clock with backup cap., Debug-UART accessible via Keith & Koep Flex-Connector

Wireless Communication: Onboard WLAN module, IEEE 802.11 b/g

Power units: Low cost PMU variant with internal DC/DC and LDOs inside i.MX28

Expandability

Extension Connector: SL2-40 2.0mm Pin header

Extension interfaces: Power, USB2.0 Host, 4x UARTS, 2x SPI, I2C, GPIOs, PWMs, second 10/100 Ethernet, 2x FlexCAN, Audio, SPDIF

General Details

Display: 4.3" TFT-Display 480 x 272 pixes, Touch capacitive

Board Support Package: Windows Embedded CE 6.0 R3, Compact 7

Voltage Supply: Industrial +7V up to +24V supply

Support Level 1: Evaluation-Kit with BSP (binary), support on website /
Support Level 2: phone and email support for 180 days (at office time), basic hardware application notes /
Support Level 3: advanced hardware application notes, design kit including evaluation board schematics (NDA required)

Dimensions: 122 x 100 x 55 mm (W x H x D)

Include: i-PAN4-FF Baseboard, Connection Board, 4.3" display, μSD Card, solid bases, 12V@1A power supply, μUSB debug adapter with cables

Order code: 32 000.F.EVK

Technical modifications reserved, errors excepted

Compatible with

i-PAN4

Intelligent Touch Panel with NXP i.MX 28 processor