"DOM" (Display On Module) device with NXP i.MX 28 processor
Low Power NXP i.MX 287 CPU, 454MHz (before Freescale)
128 MB DDR2-RAM
Onboard 4 Bit wide μSD Socket for cards up to 32GB (μSD card with Operation system is required)
Display Interfaces: 4.3" res. /cap. touch TFT-display (480 x 272 pixel)
Features: μUSB2.0-OTG connector, 2x non-isolated FlexCAN Transceivers, 10/100 Ethernet PHY, i2S Audio Codec, Realtime Clock with backup cap., Debug-UART accessible via Keith & Koep Flex-Connector
Wireless Communication: Onboard WLAN module, IEEE 802.11 b/g
Power units: Low cost PMU variant with internal DC/DC and LDOs inside i.MX28
Extension Connector: SL2-40 2.0mm Pin header or MXM-230 pin card edge connector
Extension interfaces: Power, USB2.0 Host, 4x UARTS, 2x SPI, I2C, GPIOs, PWMs, second 10/100 Ethernet, 2x FlexCAN, Audio, SPDIF
Operating Systems: Microsoft Windows Embedded CE 6.0 R3, Compact 7
Voltage Supply: +5V DC single supply via μUSB-Connector or extension connector / power consumption below 2.5W LiPo interface
Operating Temperature: 0°C to +70°C / -20°C to +85°C industrial on request
Dimensions: 105.5 mm x 77.5 mm x 13.5 mm (W x H x D)
Environmental Standard: RoHS, REACH, WEEE
Availability: 10 years form, function*
Order code: 32 145.TPR (res. touch) / 32 145.TPC (cap. touch)
Technical modifications reserved, errors excepted
*Beginning product life circle