Trizeps VIII Nano

CPU: NXP™ i.MX 8M Nano with Arm^® Quad-Core Cortex™ A53 at up to 1.5GHz (consumer), 1.4GHz (industrial), with integrated Cortex™ M7

MCU: NXP™ Kinetis V Arm^® Cortex™ M0+ at up to 75MHz / 8x 16bit ADC, CAN, UART, SPI, GPIO etc. (optional)

Up to 4 GByte LPDDR4-3200, 16Bit

Onboard 4 Bit wide μSD Card Socket (recommendation) or onboard 8 Bit wide eMMC – not available at the same time

No onboard WiFi-Bluetooth module available, external chipsets for wireless communication can be connected via SDIO or USB interfaces

Display Interfaces: MIPI display (4ch), Single-, Dual-LVDS or LCD 24 Bit RGB

Interfaces: USB2.0 OTG, 4 Bit wide SDIO, SPDIF In/Out, I2S, Multichannel Serial-Audio-Interface, 4x UART, 2x I2C, SPI, QSPI, GPIOs, PWM

Ethernet: Onboard 10/100MBit/1GBit RGMII PHY or SIOP interface

FPGA: Programmable FPGA with up to 4300 LUTs to convert parallel display/camera/data-streams to MIPI DSI/CSI (optional)

Extension Connector: Additional FX11 60pol. high-speed board to board connector

Camera Interfaces: 8bit parallel, MIPI Camera (4ch)

Audio Codec: Stereo Headphone output, Mono Speaker output, Stereo Line-In, Microphone input

Power: High-Eff. PMIC with single supply controlled by I2C

SODIMM200 Card Edge Connector: Pin compatible to Trizeps SODIMM-200 CPU modules

System Software: Linux Kernel 4.14, Android 9, Windows 10 IoT Core

Voltage Supply: +3V3 DC

Operating Temperature: -40 … 85°C (Industrial) / -25 … 85°C (Extended Consumer) / 0 … 70°C (Consumer)

Board Dimensions: 67.6 x 36.7 x 6.4 mm (W x H x D)

Environmental Standard: RoHS, REACH, WEEE

Availability: 10 years form, fit, function*